---

Shipping Policy

Request Info / Quote

Direct Connect - IR Kit - Build Your Own

The Build Your Own IR Remote Networking KIt All components of the Kit are at Reduced Pricing - See options next to the "Buy Now" Button   IR Network Kit Build Your Own Specifications ·          Components Required for a Complete IR Network o         IRCB4 - IR Connecting Block - The Brains for the IR Network o         IR Receiver - You Point the Remote at this. o         IRPS - IR Power Supply - Plugs into IRCB4 and powers IR Network o         IR Flashers/Emitters- : Send IR Signal to Components o         3 or 4 Conductor Signal Wire - or CAT5 - Connects IR Receiver to IRCB4 ·          See Individual Components Listed below for product specific specifications ·          IRCB4 - IR connecting block - Must be Selected for Kit Discount ·          ANY IR Receiver - Must be Selected for Kit Discount ·          Options        o         IRCB4 - IR Connecting Block - Must Be Purchased with Kit o         Flush Mount IR Receiver o         Surface Mount IR Receiver - Black o         J-Box IR Receiver o         Table Top IR Receiver o         12VDC Power Supply o         IRE1 – Single IR Emitter o         IRE1TB – Single IR Emitter w/ Talk Back o         IRE2 – Dual IR Emitter o         IRE2TB – Dual IR Emitter w/ Talk Back o         Shielded 4 Wire IR Control Wire IRKIT

IR Connecting Block Add 1- IRCB4 Connecting Block + $30.00 IR Receiver Black Surface Mount + $54.00 Flush Mount IR Receiver + $54.00 J-Box IR Receiver + $54.00 Table Top IR Receiver + $54.00 Single Emitter IR Flashers No Thanks 1 - IRE1 + $6.00 2 - IRE1 + $12.00 3 - IRE1 + $18.00 4 - IRE1 + $24.00 1 - IRE1TB + $6.50 2 - IRE1TB + $13.00 3 - IRE1TB + $19.50 4 - IRE1TB + $32.50 Dual Emitter IR Flashers No Thanks 1 - IRE2 + $8.00 2 - IRE2 + $16.00 3 - IRE2 + $24.00 4 - IRE2 + $32.00 1 - IRE2TB + $8.75 2 - IRE2TB + $17.50 3 - IRE2TB + $26.25 4 - IRE2TB + $35.00 Power Supply No Thanks Yes + $10.00 Control Wire NO Thanks 25 Feet + $5.00 50 Feet + $10.00 75 Feet + $15.00 100 Feet + $20.00 125 Feet + $25.00 150 Feet + $30.00 175 Feet + $35.00 200 Feet + $40.00 225 Feet + $45.00 250 Feet + $50.00 275 Feet + $55.00 300 Feet + $60.00 325 Feet + $65.00 350 Feet + $70.00 375 Feet + $75.00 400 Feet + $80.00 425 Feet + $85.00 450 Feet + $90.00 475 Feet + $95.00 500 Feet + $100.00 1000 Feet + $190.00

 

---

Shipping Policy

Request Info / Quote

Direct Connect - IRCB4 - Amplified IR Connecting Block

The Direct Connect IRCB4 amplified IR connecting block for IR networks enables the user to connect 1 or more IR receivers (Repeater/Targets/Eyes) to 8 or more pieces of equipment. The IRCB4 features 4 emitter connections easily enabling 8 flasher/emitter connectivity (more con be connected if spliced) and a 12V DC Status port that can be used to illuminate a status LED on your control (receiving eyes, keypads, etc.) showing that the circuit is properly wired or to show when an item is on. This can be from a 12V triggered output like ones found on many types of AV equipment or from a separate 12VDC power supply on a switched outlet. The removable large screw terminal allows many IR repeaters (receiving eyes) to be connected.   IRCB4 IR Amplifying Connecting BlockSpecifications ·          The Brains of the IR Network - Everything Connects to This ·          Four IR Flasher/Emitter Ports: 3.5mm Male ·          12VDC Power Input Connector: 2.1mm Female ·          12VDC Status Input Connector: 2.1mm Female ·          Removable Connector for IR IR Receiving Eye Connections o         V+: 12VDC o         G: Ground o         ST: Status o         IR: IR Signal ·          Compatible with ALL IR Codes ·          Compatible with most MFG IR networking components ·          Power Supply Not Included View the IRCB4 IR Connecting Block Instructions IRCB4

Larger IRCB4 IR Connecting Block

 

---

Shipping Policy

Request Info / Quote

Direct Connect - IRE1 - Single Emitter IR Flasher

The Direct Connect IRE1 is a single emitter flasher for IR networks that enables the user to connect 1 or more components for IR reception of codes. Placing this emitter directly over the component IR receiver eye enables reception of codes or placing the emitter on a shelf or door will enable multiple components to receive the commands from one flasher. The IR flasher has an adhesive back for secure the flasher to a shelf or component and the IR flasher is transparent to IR codes so a IR remote can be pointed directly at the component for control.   IRE1 IR Emitter / Flasher Specifications ·          Single Emitter IR Flasher: 3.5mm Male Plug ·          10 Foot Cable Length ·          IR Flasher casing is transparent to IR codes ·          Adhesive Tape provided for adhering to most surfaces ·          Transmits ALL IR codes ·          Compatible with most MFG IR networking components   View the IRE1 IR Emitter Instructions   Automatic 10% Discount on purchases of 5 to 9 Automatic 15% Discount on purchases of 10 or more Save Money and buy this as an option with the IRCB4 IR Connecting Block. IRE1

Larger IRE1 IR Emitter

 

---

Shipping Policy

Request Info / Quote

Direct Connect - IRE1TB - Single Emitter "Talk Back" IR Flasher

The Direct Connect IRE1TB is a single emitter flasher with talk back LED for IR networks that enables the user to connect 1 or more components for IR reception of codes. Placing this flasher/emitter directly over the component IR receiving eye enables reception of codes or placing the emitter on a shelf or door will enable multiple components to receive the commands from one flasher. The IR flasher has an adhesive back for secure the flasher to a shelf or component and the IR flasher is transparent to IR codes so a IR remote can be pointed directly at the component for control. The Talk Back LED provides feedback for the status of the IR network. When the Talk Back LED is illuminated IR signals are being processed.    IRE1TB IR Emitter w/ Talk Back Specifications ·          Single Emitter IR Flasher: 3.5mm Male Plug ·          10 Foot Cable Length ·          IR Flasher casing is transparent to IR codes ·          Adhesive Tape provided for adhering to most surfaces ·          Transmits ALL IR codes ·          Compatible with most MFG IR networking components ·          Talk Back LED for Status of the IR Network View the IRE1TB IR Emitter / Flasher Instructions Automatic 10% Discount on purchases of 5 to 9 Automatic 15% Discount on purchases of 10 or more   Note: Plasma TVs, LCD TVs, Sun Light, compact Fluorescent Lights all cause IR interference. LCD TVs and CFL (Compact Fluorescent Bulbs) are know to provide the strongest interference. IR interference will cause the Talk-Back, Feedback, or status LED to stay light or flicker on components that have this feature. The presence of IR interference reduces the acceptable range of an IR network and we suggest testing your mounting positions before permanently installing the components. IRE1TB

Larger IRE1TB IR Emitter

 

---

Shipping Policy

Request Info / Quote

Direct Connect - IRE2 - Dual Emitter IR Flasher

The Direct Connect IRE2 is a dual emitter flasher for IR networks that enables the user to connect 2 or more components for IR reception of codes. Placing this emitter directly over the component IR receiver eyes enable reception of codes or placing the emitter on a shelf or door will enable multiple components to receive the commands from one flasher. The IR flasher has an adhesive back for secure the flasher to a shelf or component and the IR flasher is transparent to IR codes so a IR remote can be pointed directly at the component for control.   IRE2 Dual IR Emitter / Flasher Specifications ·          Dual Emitter IR Flasher: 3.5mm Male Plug ·          10 Foot Cable Length ·          IR Flasher casing is transparent to IR codes ·          Adhesive Tape provided for adhering to most surfaces ·          Transmits ALL IR codes ·          Compatible with most MFG IR networking components View the IRE2 Dual IR Emitter Instructions Automatic 10% Discount on purchases of 5 to 9 Automatic 15% Discount on purchases of 10 or more Save Money and buy this as an option with the IRCB4 IR Connecting Block. IRE2

Larger IRE2 Dual IR Emitter

 

---

Shipping Policy

Request Info / Quote

Direct Connect - IRE2TB - Dual Emitter "Talk Back" IR Flasher

The Direct Connect IRE2 is a dual emitter flasher with Talk Back LED for IR networks that enables the user to connect 2 or more components for IR reception of codes. Placing this emitter directly over the component IR receiver eyes enable reception of codes or placing the emitter on a shelf or door will enable multiple components to receive the commands from one flasher. The IR flasher has an adhesive back for secure the flasher to a shelf or component and the IR flasher is transparent to IR codes so a IR remote can be pointed directly at the component for control. The Talk Back LED provides feedback for the status of the IR network. When the Talk Back LED is illuminated IR signals are being processed.    IRE2TB Dual Emitter Emitter w/ Talk Back Specifications ·          Dual Emitter IR Flasher: 3.5mm Male Plug ·          10 Foot Cable Length ·          IR Flasher casing is transparent to IR codes ·          Adhesive Tape provided for adhering to most surfaces ·          Transmits ALL IR codes ·          Compatible with most MFG IR networking components ·          Talk Back LED for Status of the IR Network View the IRE2TB Dual IR Flasher / Emitter  Instructions Automatic 10% Discount on purchases of 5 to 9 Automatic 15% Discount on purchases of 10 or more   Note: Plasma TVs, LCD TVs, Sun Light, compact Fluorescent Lights all cause IR interference. LCD TVs and CFL (Compact Fluorescent Bulbs) are know to provide the strongest interference. IR interference will cause the Talk-Back, Feedback, or status LED to stay light or flicker on components that have this feature. The presence of IR interference reduces the acceptable range of an IR network and we suggest testing your mounting positions before permanently installing the components. IRE2TB

Larger IRE2TB IR Emitter

 

---

Shipping Policy

Request Info / Quote

Direct Connect - IRPS - IRCB4 IR Connecting Block Power Supply

The Direct Connect IRPS is a 12VDC 300ma wall plug power supply designed for use with the Direct Connect IRCB4 IR connecting block. This product is used to amplify the IR signal in IR control networks.   IRPS IR Connecting Block Power Supply Specifications ·          Power supply for IRCB4 ·          12VDC 300ma ·          2.1mm Plug ·          6 Foot Cord Length Save Money and buy this as an option with the IRCB4 IR Connecting Block. IRPS

Larger IRPS12 12VDC Power Supply

 

---

Shipping Policy

Request Info / Quote

Direct Connect - IRRFM - Flush Mount IR Receiver w/ Talk Back

The Direct Connect IRRFM is a flush mount bullet style IR Receiver designed for use with the Direct Connect IRCB4 IR connecting block but can be used with any IR control products that are 12V powered. This product is used to receive IR signals remotely so they can be transferred to the IR connecting block and then distributed to the components via IR Flashers or IR Emitters. Ideal for mounting in cabinets, doors, wall plates, speakers etc.        Works with all IR connecting blocks that have: IR (or S Signal), V+ and G Connections including Xantech, Niles, Russound that are 12V powered.   Direct Connect  - IRRFM - Flush Mount IR Receiver Specifications     ·    Flush Mount IR Receiver     ·    Plasma Friendly - NOT LCD/CFL Proof     ·    Designed for 12V IR Products     ·    3 Wire Connection - 6' of lead provided     ·    +/-45 Degree off axis reception angle     ·    Tested to have a wide 160 Degree reception angle     ·    80' Reception Range Indoors     ·    15' Reception Range in Direct Sunlight     ·    Can be connected in parallel with up to 3 total IR Receivers     ·    Talk Back LED shows status of IR signal     ·    Works with nearly all remote controls     ·    Solid Brass Construction     ·    Mounting Depth Required - 1.90"     ·    Mounting Hole Required - 0.465"     ·    5 yr Warranty View the IRRFM IR Receiver Instructions Note: Plasma TVs, LCD TVs, Sun Light, compact Fluorescent Lights all cause IR interference. LCD TVs and CFL (Compact Fluorescent Bulbs) are know to provide the strongest interference. IR interference will cause the Talk-Back, Feedback, or status LED to stay light or flicker on components that have this feature. The presence of IR interference reduces the acceptable range of an IR network and we suggest testing your mounting positions before permanently installing the components. IRRFM

Larger IRRFM IR Receiver

 

---

Shipping Policy

Request Info / Quote

Direct Connect - IRRSM - Surface Mount IR Receiver

The Direct Connect IRRSM is a surface mount style IR Receiver designed for use with the Direct Connect IRCB4 IR connecting block but can be used with any IR control products that are 12V powered. This product is used to receive IR signal remotely so they can be transfered to the IR connecting block and then distributed to the components via IR Flashers or IR Emitter. Ideal for mounting in cabinets, doors, wallplates, speakers etc.       Works with all IR connecting blocks that have: IR (or S Signal), V+ and G Connections including Xantech, Niles, Russound that are 12V powered.   Direct Connect IRRSM IR Receiver Specifications ·          Surface Mount IR Receiver ·          Color: Black Only ·          Plasma Friendly - NOT LCD/CFL Proof ·          Double Sided Adhesive Pad Supplied ·          Designed for 12V IR Networks ·          3 Wire Connection - 6' of lead provided ·          +/- 45 Degree Reception Angle ·          Greater than 30' Reception Range ·          30 to 100KHz Remote Frequency Bandwidth ·          Can be connected in parrallel with up to 3 total IR Receivers ·          Works with nearly all remote controls ·          Dimensions - 0.39"W x 2.015"L x 0.33"H ·          5 yr Warranty View the IRRSM IR Receiver Instructions Note: Plasma TVs, LCD TVs, Sun Light, compact Fluorescent Lights all cause IR interference. LCD TVs and CFL (Compact Fluorescent Bulbs) are know to provide the strongest interference. IR interference will cause the Talk-Back, Feedback, or status LED to stay light or flicker on components that have this feature. The presence of IR interference reduces the acceptable range of an IR network and we suggest testing your mounting positions before permanently installing the components. IRRSM

Larger IRRSM IR Receiver Image

 

---

Shipping Policy

Request Info / Quote

Direct Connect - IRRJB - J-Box Mount IR Receiver w/ Talk Back

The Direct Connect IRRJB is a Junction Box IR Reeiver designed for use with the Direct Connect IRCB4 IR connecting block but can be used with any IR network control products that are 12V powered. This product is used to receive IR signals remotely so they can be transfered to the IR connecting block and then distributed to the IR network components via IR Flashers or IR Emitter. Ideal for mounting junction boxes.       The Talk Back LED provides feedback for the status of the IR network. When the Talk Back LED is illuminated IR signals are being processed.        Works with all IR connecting blocks that have: IR (or S Signal), V+ and G Connections including Xantech, Niles, Russound that are 12V powered.   IRRJB IR J-Box Receiver Specifications ·          J-Box IR Receiver ·          Plasma Friendly - NOT LCD/CFL Proof ·          Designed for use with 12V IR Products ·          3 Wire Terminal Block Connection ·          Talk Back LED shows status of IR signal ·          +/-45 Degree off axis reception angle ·          Tested to have a wide 160 Degree reception angle ·          80' Reception Range Indoors ·          15' Reception Range in Direct Sunlight ·          Can be connected in parrallel with up to 3 total IR Receivers ·          Works with nearly all remote controls ·          Mounting Depth Required - 1" ·          Optional Decorator Trim Plate Not Included ·          5 yr Warranty View the IRRJB J-Box IR Receiver Instructions View the IRRJB J-Box IR Receiver Back Note: Plasma TVs, LCD TVs, Sun Light, compact Fluorescent Lights all cause IR interference. LCD TVs and CFL (Compact Fluorescent Bulbs) are know to provide the strongest interference. IR interference will cause the Talk-Back, Feedback, or status LED to stay light or flicker on components that have this feature. The presence of IR interference reduces the acceptable range of an IR network and we suggest testing your mounting positions before permanently installing the components. IRRJB

Trim Plate No Thanks White Trim Plate + $0.35 Larger IRRJB J-Box IR Receiver

 

---

Shipping Policy

Request Info / Quote

Direct Connect - IRRTT - Table Top IR Receiver w/ Talk Back

The Direct Connect IRRTT is a Table top style IR Reeiver designed for use with the Direct Connect IRCB4 IR connecting block but can be used with any IR control products that are 12V powered. This product is used to receive IR signals remotely so they can be transfered to the IR connecting block and then distributed to the components via IR Flashers or IR Emitters. Ideal for setting on shelves, TV or equipment racks etc.       Works with all IR connecting blocks that have: IR (or S Signal), V+ and G Connections including Xantech, Niles, Russound that are 12V powered.   IRRTT Table Top IR Receiver Specifications ·          Table Top IR Receiver ·          Plasma Friendly - NOT LCD/CFL Proof ·          Designed to be compatible with 12V IR Products ·          3.5mm Plug and Adapter for Direct Wiring ·          3 Wire Connection - V+, G, IR ·          Wide 90 Degree reception angle ·          80' Reception Range Indoors ·          15' Reception Range in Direct Sunlight ·          Can be connected in parrallel with up to 3 total IR Receivers ·          30 to KHz Ifrared Frequency Bandwidth ·          Works with nearly all remote controls ·          Dimensions - 4.2"W x 2.2" D x 0.1.2"H ·          5 yr Warranty View the IRRTT IR Receiver Instructions Note: Plasma TVs, LCD TVs, Sun Light, compact Fluorescent Lights all cause IR interference. LCD TVs and CFL (Compact Fluorescent Bulbs) are know to provide the strongest interference. IR interference will cause the Talk-Back, Feedback, or status LED to stay light or flicker on components that have this feature. The presence of IR interference reduces the acceptable range of an IR network and we suggest testing your mounting positions before permanently installing the components. IRRTT

Larger IRRTT IR Receiver Image

 

---

Shipping Policy

Request Info / Quote

Direct Connect DC224S 4 Conductor Control Wire w/ Shield - Per Foot

ft

Direct Connect - DC224S IR Control and Low Voltage Wire       §          4 Conductor 22 AWG Control Wire §          Mylar Foil Shield with Drain Wire §          Use for IR Control, Home Automation Control and Low Voltage Wiring §          UL/CL3 Rated for In-Wall Use for up to 300v §          22 AWG Black, Red, White and Green Conductors §          0.015” Grey PVC outer Jacket §          Sequential Foot Markings §           Priced Per Foot §          Stocked in 1000ft Reel Boxes  224S

Length 25 Feet + $3.75 50 Feet + $7.50 75 Feet + $11.25 100 Feet + $15.00 125 Feet + $18.75 150 Feet + $22.50 175 Feet + $26.25 200 Feet + $30.00 225 Feet + $33.75 250 Feet + $37.50 275 Feet + $41.25 300 Feet + $45.00 325 Feet + $48.75 350 Feet + $52.50 375 Feet + $56.25 400 Feet + $60.00 425 Feet + $63.75 450 Feet + $67.50 475 Feet + $71.25 500 Feet + $75.00 1000 Feet + $119.00 Larger 4 Conductor Control Wire

 

---

Shipping Policy

Request Info / Quote

Direct Connect DC223S 3 Conductor Control Wire w/ Shield - Per Foot

ft

Direct Connect - DC223S IR Control and Low Voltage Wire       §          3 Conductor 22 AWG Control Wire         §          Color: Burgundy   §          Mylar Foil Shield with Drain Wire §          Use for IR Control, Home Automation Control and Low Voltage Wiring §          UL/CL3 Rated for In-Wall Use for up to 300v §          22 AWG Black, Red and White Conductors §          0.015” PVC Outer Jacket §          Sequential Foot Markings §           Priced Per Foot §          Stocked in 1000ft Reel Boxes 223S

Larger 3 Conductor Control Wire

 

---

Shipping Policy

Request Info / Quote

Direct Connect CAT-5E Data Cable - Per Foot

CAT-5E In-Wall Data Cable •       Category-5E Rated at 400MHz •       Four Color Coded twisted pair construction •       24 Awg Solid Wire Construction •       0.60mm PVC Jacket •       0.195mm HDPE Conductor Insulation •       CL-3/FT-4 Rated, UL Approved for In-Wall Use •       Solid OFHC Copper Conductors •       Nylon rip-cord for easy stripping •       Heavy duty, sequentially marked, low-loss, low friction outer jacket •       For use with : Security, Phone, DSS, Audio, Video and Computer applications. •      Color is WHITE         •    Stocked in 1000' Spools         •    Sold Per Foot: Specify Qty as # of Feet         •    CAT5E Wiring Digram is provided below CAT5E Wiring Diagram Connector - Tab Down - Front View - Position   1 2 3 4 5 6 7 8 T568A W/G G W/O BL W/BL O W/BR BR T568B W/O O W/G BL W/BL G W/BR BR 424C5E

Larger CAT5E Image

 

---